#Factorio oil refinery how to#
#Factorio oil refinery cracked#

As long as the heavy oil output is routed back into the refinery before being sent anywhere else, the refinery will be self-sustaining in terms of heavy oil, only requiring steam and coal to run. Once coal liquefaction is researched, the player can manufacture oil products anywhere without a need for crude oil: the player can set up an oil refinery to utilize coal liquefaction and use an assembling machine and barrels to manually insert a small amount of heavy oil into the system to initiate production. If the player has too much heavy oil, cracking it to light oil then making it into fuel is more efficient than making heavy oil into fuel directly.

Solid fuel is most efficient when created from light oil.

If you run your heavy oil pipe from the refineries past a lubricant-making chemical plant before sending it to the cracking chemical plants, you can be sure that the lubricant production will have priority over cracking.

#Factorio oil refinery how to#

For examples on how to do this, see the circuit-network cookbook. The circuit network can be used to easily control how much fluid gets used for each recipe, to ensure that the player always has enough.This is useful if the player has an abundance of one product, but is lacking another (a common problem).

#Factorio oil refinery cracked#

Furthermore, both heavy oil and light oil can be cracked to the next lower type in a chemical plant (recipe above). The refinery will stop production of all products if one product output is full, so it should be ensured that the products are transported out of the refinery any products that cannot be used should be (temporarily) stored in a storage tank. The locations of these cannot be changed, only the entire machine can be rotated.ДЄdvanced oil processing and coal liquefaction produce multiple fluids: heavy oil, light oil and petroleum gas. Once it is set and 'alt-mode' is active, the input and output locations and the expected fluids are shown. The oil refinery needs to have a recipe set (see above for available recipes). Pumpjacks produce a certain amount of Crude oil per second, shown on the right, at the bottom of the information panel.Д¬rude oil must be refined in an oil refinery. Now disconnects from pipes when recipe is reset.Pumpjacks need to be placed on top of the middle of the oil well, which is highlighted with a green box when the pumpjack is held.Basic oil processing keeps some of the refinery input/output slots unused, so it is more clear which ones will be used by Advanced oil processing.Basic oil processing produces only Petroleum gas, for more streamlined oil setup in the beginning.

It will stop working if any of the products are not properly drained from it (that is, 100.0 heavy oil at output will prevent production of the 2 other fluids).

You need to choose the recipe, otherwise it won't work.

When the refinery is working, a flame comes out of the chimney. (For advanced oil processing, the water input is to the right when the inputs are coming into the top.)

When placing the refinery, it can be rotated, but otherwise neither input nor output tiles can be swapped in any way.